Rapidmix 600 C

This plant has been designed to be totally mobile and completely self-contained with it’s own power source. Completely self erecting, the hydraulic system changes the plant from travel mode into a fully operational within a few hours. The Rapidmix 600 C mixes up to 600 Tonnes per hour depending on application with fully adjustable feed rates for the aggregate, cement and water systems.

The plant consists of a number of components

Loading Hopper

Loading Hopper with steep sides and lining material to receive the aggregate or soil from loading shovel bucket. A belt feeder is mounted on the outlet of the hopper.

Twinshaft Pugmill Mixer

Twinshaft continuous pugmill mixer to mix the aggregate and cement material. Chill Cast Steel Mixing Paddles mix the material whilst propelling it along the mixing chamber. Twin electric geared motors drive the mixing shafts. Large opening covers on side and top of mixer give maximum maintenance access. A belt conveyor forms the base of the mixing chamber simplifying the cleaning operation.

Cement Silo

Silo to store the cement or binder material. Reverse jet filter with safety system to prevent silo from over-filling or over pressure. A rotary valve fitted to the outlet of the silo meters the material into the mixer at a consistent feed rate.

Water storage tank

On-board water storage tank with variable speed pumps to provide water to the mixer.

Out-loading Conveyor

Out-loading Conveyor to transfer the mixed material up to the collecting truck. A Gob Hopper fitted to the end of this conveyor, holds material, allowing the machine to continue to run, whilst the next truck moves in for loading.

Control System

Control system with automatic control of the machine, allowing 30 recipes for the proportioning of different materials. A printer is fitted for tickets or reports to be generated. Variable speed drives, allow the feed rates of materials to be adjusted according to the recipe.

Lattice chassis

Lattice chassis with tri-axle running gear and lighting system for full highway mobility.

Pneumatic system

Pneumatic system with compressor to give air for silo filter and gob hopper door operation.

Hydraulic system

Hydraulic system used to level the machine before erection to the working position.

Generator

Diesel powered generating set with engine directly coupled to an alternator to provide electrical power for all machine functions.

Optional Cold Feed Bin System

Cold Feed Bin System to allow multiple materials to feed the Rapidmix 600 C Mobile chassis with 3No or 4No 12m³ (16 cu yd) Bins each with feeder belt, feeding onto gathering conveyor with inclined conveyor at the end. Control hardware to operate the conveyors and hydraulic powerpack for levelling and erection of the machine.

Video